home *** CD-ROM | disk | FTP | other *** search
PPPPAAAATTTTCCCCHHHH((((1111)))) PPPPAAAATTTTCCCCHHHH((((1111)))) NNNNAAAAMMMMEEEE patch - apply a diff file to an original SSSSYYYYNNNNOOOOPPPPSSSSIIIISSSS ppppaaaattttcccchhhh [options] [origfile [patchfile]] [+ [options] [origfile]]... but usually just ppppaaaattttcccchhhh <patchfile DDDDEEEESSSSCCCCRRRRIIIIPPPPTTTTIIIIOOOONNNN _P_a_t_c_h will take a patch file containing any of the four forms of difference listing produced by the _d_i_f_f program and apply those differences to an original file, producing a patched version. By default, the patched version is put in place of the original, with the original file backed up to the same name with the extension ".orig" ("~" on systems that do not support long file names), or as specified by the ----bbbb, ----BBBB (--------pppprrrreeeeffffiiiixxxx), or ----VVVV (--------vvvveeeerrrrssssiiiioooonnnn----ccccoooonnnnttttrrrroooollll) options. The extension used for making backup files may also be specified in the SSSSIIIIMMMMPPPPLLLLEEEE____BBBBAAAACCCCKKKKUUUUPPPP____SSSSUUUUFFFFFFFFIIIIXXXX environment variable, which is overridden by the above options. If the backup file already exists, ppppaaaattttcccchhhh creates a new backup file name by changing the first lowercase letter in the last component of the file's name into uppercase. If there are no more lowercase letters in the name, it removes the first character from the name. It repeats this process until it comes up with a backup file that does not already exist. You may also specify where you want the output to go with a ----oooo (--------oooouuuuttttppppuuuutttt) option; if that file already exists, it is backed up first. If _p_a_t_c_h_f_i_l_e is omitted, or is a hyphen, the patch will be read from standard input. Upon startup, patch will attempt to determine the type of the diff listing, unless over-ruled by a ----cccc (--------ccccoooonnnntttteeeexxxxtttt), ----eeee (--------eeeedddd), ----nnnn (--------nnnnoooorrrrmmmmaaaallll), or ----uuuu (--------uuuunnnniiiiffffiiiieeeedddd) option. Context diffs (old-style, new-style, and unified) and normal diffs are applied by the _p_a_t_c_h program itself, while _e_d diffs are simply fed to the _e_d editor via a pipe. _P_a_t_c_h will try to skip any leading garbage, apply the diff, and then skip any trailing garbage. Thus you could feed an article or message containing a diff listing to _p_a_t_c_h, and it should work. If the entire diff is indented by a consistent amount, this will be taken into account. With context diffs, and to a lesser extent with normal diffs, _p_a_t_c_h can detect when the line numbers mentioned in the patch are incorrect, and will attempt to find the correct place to apply each hunk of the patch. As a first guess, it takes the line number mentioned for the hunk, plus or minus any offset used in applying the previous hunk. If that is not the correct place, _p_a_t_c_h will scan both forwards and backwards for a set of lines matching the context given in the hunk. First _p_a_t_c_h looks for a place where all lines of the context match. If no such place is found, PPPPaaaaggggeeee 1111 PPPPAAAATTTTCCCCHHHH((((1111)))) PPPPAAAATTTTCCCCHHHH((((1111)))) and it's a context diff, and the maximum fuzz factor is set to 1 or more, then another scan takes place ignoring the first and last line of context. If that fails, and the maximum fuzz factor is set to 2 or more, the first two and last two lines of context are ignored, and another scan is made. (The default maximum fuzz factor is 2.) If _p_a_t_c_h cannot find a place to install that hunk of the patch, it will put the hunk out to a reject file, which normally is the name of the output file plus ".rej" ("#" on systems that do not support long file names). (Note that the rejected hunk will come out in context diff form whether the input patch was a context diff or a normal diff. If the input was a normal diff, many of the contexts will simply be null.) The line numbers on the hunks in the reject file may be different than in the patch file: they reflect the approximate location patch thinks the failed hunks belong in the new file rather than the old one. As each hunk is completed, you will be told whether the hunk succeeded or failed, and which line (in the new file) _p_a_t_c_h thought the hunk should go on. If this is different from the line number specified in the diff you will be told the offset. A single large offset MAY be an indication that a hunk was installed in the wrong place. You will also be told if a fuzz factor was used to make the match, in which case you should also be slightly suspicious. If no original file is specified on the command line, _p_a_t_c_h will try to figure out from the leading garbage what the name of the file to edit is. In the header of a context diff, the file name is found from lines beginning with "***" or "---", with the shortest name of an existing file winning. Only context diffs have lines like that, but if there is an "Index:" line in the leading garbage, _p_a_t_c_h will try to use the file name from that line. The context diff header takes precedence over an Index line. If no file name can be intuited from the leading garbage, you will be asked for the name of the file to patch. If the original file cannot be found or is read-only, but a suitable SCCS or RCS file is handy, _p_a_t_c_h will attempt to get or check out the file. Additionally, if the leading garbage contains a "Prereq: " line, _p_a_t_c_h will take the first word from the prerequisites line (normally a version number) and check the input file to see if that word can be found. If not, _p_a_t_c_h will ask for confirmation before proceeding. The upshot of all this is that you should be able to say, while in a news interface, the following: | patch -d /usr/src/local/blurfl and patch a file in the blurfl directory directly from the article containing the patch. If the patch file contains more than one patch, _p_a_t_c_h will try to apply each of them as if they came from separate patch files. This means, among other things, that it is assumed that the name of the file to patch PPPPaaaaggggeeee 2222 PPPPAAAATTTTCCCCHHHH((((1111)))) PPPPAAAATTTTCCCCHHHH((((1111)))) must be determined for each diff listing, and that the garbage before each diff listing will be examined for interesting things such as file names and revision level, as mentioned previously. You can give options (and another original file name) for the second and subsequent patches by separating the corresponding argument lists by a '+'. (The argument list for a second or subsequent patch may not specify a new patch file, however.) _P_a_t_c_h recognizes the following options: ----bbbb explicitly specify ".orig" as the backup file extension. ----BBBB pppprrrreeeeffff,,,, --------pppprrrreeeeffffiiiixxxx====pppprrrreeeeffff causes pppprrrreeeeffff to be interpreted as a prefix to the backup file name. If this argument is specified, any argument from ----bbbb will be ignored. ----cccc,,,, --------ccccoooonnnntttteeeexxxxtttt forces _p_a_t_c_h to interpret the patch file as a context diff. ----dddd ddddiiiirrrr,,,, --------ddddiiiirrrreeeeccccttttoooorrrryyyy====ddddiiiirrrr causes _p_a_t_c_h to interpret ddddiiiirrrr as a directory, and cd to it before doing anything else. ----DDDD ssssyyyymmmm,,,, --------iiiiffffddddeeeeffff====ssssyyyymmmm causes _p_a_t_c_h to use the "#ifdef...#endif" construct to mark changes. ssssyyyymmmm will be used as the differentiating symbol. ----eeee,,,, --------eeeedddd forces _p_a_t_c_h to interpret the patch file as an _e_d script. ----EEEE,,,, --------rrrreeeemmmmoooovvvveeee----eeeemmmmppppttttyyyy----ffffiiiilllleeeessss causes _p_a_t_c_h to remove output files that are empty after the patches have been applied. ----ffff,,,, --------ffffoooorrrrcccceeee forces _p_a_t_c_h to assume that the user knows exactly what he or she is doing, and to not ask any questions. It assumes the following: skip patches for which a file to patch can't be found; patch files even though they have the wrong version for the ``Prereq:'' line in the patch; and assume that patches are not reversed even if they look like they are. This option does not suppress commentary; use ----ssss for that. ----tttt,,,, --------bbbbaaaattttcccchhhh similar to ----ffff, in that it suppresses questions, but makes some different assumptions: skip patches for which a file to patch can't be found (the same as ----ffff); skip patches for which the file has the wrong version for the ``Prereq:'' line in the patch; and assume that patches are reversed if they look like they are. PPPPaaaaggggeeee 3333 PPPPAAAATTTTCCCCHHHH((((1111)))) PPPPAAAATTTTCCCCHHHH((((1111)))) ----FFFF nnnnuuuummmmbbbbeeeerrrr,,,, --------ffffuuuuzzzzzzzz====nnnnuuuummmmbbbbeeeerrrr sets the maximum fuzz factor. This option only applies to context diffs, and causes _p_a_t_c_h to ignore up to that many lines in looking for places to install a hunk. Note that a larger fuzz factor increases the odds of a faulty patch. The default fuzz factor is 2, and it may not be set to more than the number of lines of context in the context diff, ordinarily 3. ----llll,,,, --------iiiiggggnnnnoooorrrreeee----wwwwhhhhiiiitttteeeessssppppaaaacccceeee causes the pattern matching to be done loosely, in case the tabs and spaces have been munged in your input file. Any sequence of whitespace in the pattern line will match any sequence in the input file. Normal characters must still match exactly. Each line of the context must still match a line in the input file. ----nnnn,,,, --------nnnnoooorrrrmmmmaaaallll forces _p_a_t_c_h to interpret the patch file as a normal diff. ----NNNN,,,, --------ffffoooorrrrwwwwaaaarrrrdddd causes _p_a_t_c_h to ignore patches that it thinks are reversed or already applied. See also ----RRRR .... ----oooo ffffiiiilllleeee,,,, --------oooouuuuttttppppuuuutttt====ffffiiiilllleeee causes ffffiiiilllleeee to be interpreted as the output file name. ----pppp nnnnuuuummmmbbbbeeeerrrr,,,, --------ssssttttrrrriiiipppp[[[[====nnnnuuuummmmbbbbeeeerrrr]]]] sets the pathname strip count, which controls how pathnames found in the patch file are treated, in case the you keep your files in a different directory than the person who sent out the patch. The strip count specifies how many slashes are to be stripped from the front of the pathname. (Any intervening directory names also go away.) For example, supposing the file name in the patch file was /u/howard/src/blurfl/blurfl.c setting ----pppp0000 gives the entire pathname unmodified, ----pppp1111 gives u/howard/src/blurfl/blurfl.c without the leading slash, ----pppp4444 gives blurfl/blurfl.c and not specifying ----pppp at all just gives you "blurfl.c", unless all of the directories in the leading path (u/howard/src/blurfl) exist and that path is relative, in which case you get the entire pathname unmodified. Whatever you end up with is looked for either in the current directory, or the directory specified by the ----dddd option. ----rrrr ffffiiiilllleeee,,,, --------rrrreeeejjjjeeeecccctttt----ffffiiiilllleeee====ffffiiiilllleeee causes ffffiiiilllleeee to be interpreted as the reject file name. PPPPaaaaggggeeee 4444 PPPPAAAATTTTCCCCHHHH((((1111)))) PPPPAAAATTTTCCCCHHHH((((1111)))) ----RRRR,,,, --------rrrreeeevvvveeeerrrrsssseeee tells _p_a_t_c_h that this patch was created with the old and new files swapped. (Yes, I'm afraid that does happen occasionally, human nature being what it is.) _P_a_t_c_h will attempt to swap each hunk around before applying it. Rejects will come out in the swapped format. The ----RRRR option will not work with _e_d diff scripts because there is too little information to reconstruct the reverse operation. If the first hunk of a patch fails, _p_a_t_c_h will reverse the hunk to see if it can be applied that way. If it can, you will be asked if you want to have the ----RRRR option set. If it can't, the patch will continue to be applied normally. (Note: this method cannot detect a reversed patch if it is a normal diff and if the first command is an append (i.e. it should have been a delete) since appends always succeed, due to the fact that a null context will match anywhere. Luckily, most patches add or change lines rather than delete them, so most reversed normal diffs will begin with a delete, which will fail, triggering the heuristic.) ----ssss,,,, --------ssssiiiilllleeeennnntttt,,,, --------qqqquuuuiiiieeeetttt makes _p_a_t_c_h do its work silently, unless an error occurs. ----SSSS,,,, --------sssskkkkiiiipppp causes _p_a_t_c_h to ignore this patch from the patch file, but continue on looking for the next patch in the file. Thus patch -S + -S + <patchfile will ignore the first and second of three patches. ----uuuu,,,, --------uuuunnnniiiiffffiiiieeeedddd forces _p_a_t_c_h to interpret the patch file as a unified context diff (a unidiff). ----vvvv,,,, --------vvvveeeerrrrssssiiiioooonnnn causes _p_a_t_c_h to print out its revision header and patch level. ----VVVV mmmmeeeetttthhhhoooodddd,,,, --------vvvveeeerrrrssssiiiioooonnnn--------ccccoooonnnnttttrrrroooollll====mmmmeeeetttthhhhoooodddd causes mmmmeeeetttthhhhoooodddd to be interpreted as a method for creating backup file names. The type of backups made can also be given in the VVVVEEEERRRRSSSSIIIIOOOONNNN____CCCCOOOONNNNTTTTRRRROOOOLLLL environment variable, which is overridden by this option. The ----BBBB option overrides this option, causing the prefix to always be used for making backup file names. The value of the VVVVEEEERRRRSSSSIIIIOOOONNNN____CCCCOOOONNNNTTTTRRRROOOOLLLL environment variable and the argument to the ----VVVV option are like the GNU Emacs `version-control' variable; they also recognize synonyms that are more descriptive. The valid values are (unique abbreviations are accepted): `t' or `numbered' Always make numbered backups. PPPPaaaaggggeeee 5555 PPPPAAAATTTTCCCCHHHH((((1111)))) PPPPAAAATTTTCCCCHHHH((((1111)))) `nil' or `existing' Make numbered backups of files that already have them, simple backups of the others. This is the default. `never' or `simple' Always make simple backups. ----xxxx nnnnuuuummmmbbbbeeeerrrr,,,, --------ddddeeeebbbbuuuugggg====nnnnuuuummmmbbbbeeeerrrr sets internal debugging flags, and is of interest only to _p_a_t_c_h patchers. AAAAUUUUTTTTHHHHOOOORRRR Larry Wall <lwall@netlabs.com> with many other contributors. EEEENNNNVVVVIIIIRRRROOOONNNNMMMMEEEENNNNTTTT TTTTMMMMPPPPDDDDIIIIRRRR Directory to put temporary files in; default is /tmp. SSSSIIIIMMMMPPPPLLLLEEEE____BBBBAAAACCCCKKKKUUUUPPPP____SSSSUUUUFFFFFFFFIIIIXXXX Extension to use for backup file names instead of ".orig" or "~". VVVVEEEERRRRSSSSIIIIOOOONNNN____CCCCOOOONNNNTTTTRRRROOOOLLLL Selects when numbered backup files are made. FFFFIIIILLLLEEEESSSS $TMPDIR/patch* SSSSEEEEEEEE AAAALLLLSSSSOOOO diff(1) NNNNOOOOTTTTEEEESSSS FFFFOOOORRRR PPPPAAAATTTTCCCCHHHH SSSSEEEENNNNDDDDEEEERRRRSSSS There are several things you should bear in mind if you are going to be sending out patches. First, you can save people a lot of grief by keeping a patchlevel.h file which is patched to increment the patch level as the first diff in the patch file you send out. If you put a Prereq: line in with the patch, it won't let them apply patches out of order without some warning. Second, make sure you've specified the file names right, either in a context diff header, or with an Index: line. If you are patching something in a subdirectory, be sure to tell the patch user to specify a ----pppp option as needed. Third, you can create a file by sending out a diff that compares a null file to the file you want to create. This will only work if the file you want to create doesn't exist already in the target directory. Fourth, take care not to send out reversed patches, since it makes people wonder whether they already applied the patch. Fifth, while you may be able to get away with putting 582 diff listings into one file, it is probably wiser to group related patches into separate files in case something goes haywire. PPPPaaaaggggeeee 6666 PPPPAAAATTTTCCCCHHHH((((1111)))) PPPPAAAATTTTCCCCHHHH((((1111)))) DIAGNOSTICS Too many to list here, but generally indicative that _p_a_t_c_h couldn't parse your patch file. The message "Hmm..." indicates that there is unprocessed text in the patch file and that _p_a_t_c_h is attempting to intuit whether there is a patch in that text and, if so, what kind of patch it is. _P_a_t_c_h will exit with 1 if any reject files were created. When applying a set of patches in a loop it behooves you to check this exit status so you don't apply a later patch to a partially patched file. _P_a_t_c_h exits with a status bigger than 1 means that an error occurred. CCCCAAAAVVVVEEEEAAAATTTTSSSS _P_a_t_c_h cannot tell if the line numbers are off in an _e_d script, and can only detect bad line numbers in a normal diff when it finds a "change" or a "delete" command. A context diff using fuzz factor 3 may have the same problem. Until a suitable interactive interface is added, you should probably do a context diff in these cases to see if the changes made sense. Of course, compiling without errors is a pretty good indication that the patch worked, but not always. _P_a_t_c_h usually produces the correct results, even when it has to do a lot of guessing. However, the results are guaranteed to be correct only when the patch is applied to exactly the same version of the file that the patch was generated from. BBBBUUUUGGGGSSSS Could be smarter about partial matches, excessively deviant offsets and swapped code, but that would take an extra pass. If code has been duplicated (for instance with #ifdef OLDCODE ... #else ... #endif), _p_a_t_c_h is incapable of patching both versions, and, if it works at all, will likely patch the wrong one, and tell you that it succeeded to boot. If you apply a patch you've already applied, _p_a_t_c_h will think it is a reversed patch, and offer to un-apply the patch. This could be construed as a feature. PPPPaaaaggggeeee 7777 
